Best Stabilizer For AC In India

Best Stabilizer For AC In India

The power supply is irregular at most places in India, with voltage fluctuating in both directions (up and down) at numerous locations frequently. These voltage changes can harm home appliances by triggering them to end much before their regular life. When voltage decreases, electrical current in the appliance increases, resulting in the burning of the home appliance. Voltage Stabilizers have thus found a spot in lots of houses and workplaces in India. In this short article, we will speak about voltage stabilizers:

  • What they do.
  • How much power they consume.
  • How to select “The Best Voltage Stabilizers for AC/TV/Fridge/ Home in India in 2021”.

We will also try to explain the working of voltage stabilizers and supply you with some tips to buy a brand-new voltage stabilizer.

Best Voltage Stabilizer For AC

1. V-Guard VG 400 Voltage Stabilizer

The V-Guard VG 400 Voltage Stabilizer seems an excellent product from the producers with the capability of supporting a 1.5 ton Air Conditioner. Functions like total aluminum windings, wall install alternative, and also good ITDS innovation. The general efficiency of the V-Guard stabilizer is terrific, and it’s absolutely a thing that you can have in your home.

There’s an LED indicator that reveals the correct status to assist you with the proper voltage status. Also, the innovative IC technology design makes sure that there’s no breach in case of any short circuit.


  • ITDS technology guarantees appropriate safety.
  • The V-Guard VG 400 includes the easy-to-use LED Status Indication.
  • It has IC-based style circuitry.


  • The price is a bit on the higher side.

Also Read: Best AC Under 25000 In India

2. V-Guard VG500 Stabilizer for 2 Heap AC

The V-Guard VG 500 Voltage Stabilizer for A/C is one of the signature products from the manufacturer, and rightly it is worthy of being on the top of our list. The current features like thermal overload security, suitable operating voltage range, and ITDS technology have all the requirements for a 2 ton AC. So if you are trying to find a genuinely decent stabilizer, this is the ideal design to opt for.

If you want to prevent any doubt, we recommend you opt for a service every 6 months. Although it has both ITDS Innovation for time-delay system and HMC Innovation for defense, we advise service for deep additional care. This will help you to keep your Air Conditioning safe even when power is low.


  • Integrated thermal overload protection.
  • Has both ITDS Innovation and HMC Innovation.
  • 3 years guarantee on the item.


  • The power cable television is short. You may require an extra set of cables.

3. Microtek EM4160+ Automatic Voltage Stabilizer

The Microtek EM4160 is a fantastic choice to have if you are trying to find a stabilizer for Air Conditioner in low voltage areas. The range provided by the makers is 160 volts to 285 volts. But it works splendidly even at 170 volts. Apart from this, the features like power saver innovation and microchip-based design make it an ideal option for your house. Even you have a regular change of voltage in your home, no need to stress at all.

The wielding is made up of copper. This influences the minimum possibilities of electricity breach. We have also attempted to connect the stabilizer from a generator, and it works fine. Although there is no screen of input voltage and neither any LED indicator, it still has the precaution. So it will never be an issue for you to run the device in the house.

Microtek has numerous stabilizers presently released in India; however, the Microtek EM4160+ is an ideal option for low-voltage houses. The presence of thermal management makes the stabilizer much more trusted and safe to use. So you won’t have to stress too much even without the display screen.


  • Conserve power technology.
  • Intelli microchip-based design.
  • Low and high cut for protection.
  • Silver caked relay.
  • Intelli thermal management.


  • No LED panel available.
  • No display present.

Also Read: The Best 1 Ton Split AC In India

4. V-Guard VG 400 AE 20 Voltage Stabilizer for Non-Inverter A/C up to 1.5 Ton

The V-Guard VG 400 AE 10 2850-Watt AC Stabilizer is another fantastic product to have in your house. In reality, it is simply the very best thing that you can get if you are trying to find an inexpensive stabilizer for 1.5 ton Air Conditioning. Functions like ITDS technology, wide working variety, voltage control, and safety marks make the V-Guard VG 400 AE 10 2850-Watt A/C Stabilizer a stunning thing to have.

The Thermal Sensing unit function is suitable for a 1.5 Ton Air Conditioner. Whether you are utilizing it for an inverter or regular air conditioning, it will not matter much. The stabilizer works the same way for both. However, we have discovered a buzzing noise while the maker was working.


  • Thermal overload protector.
  • High-temperature protection.
  • Fire retardant ABS cabinet.


  • Requires a minimum of 190 volts to operate.

What Are Voltage Fluctuations, And Why Do They Take Place In Your Home?

Voltage variations are changes (boost or reduction) in voltage about your house that make the lights glow dimmer (for low voltage) or more vibrant (for high voltage) than typical depending. Usually, they are not unsafe for most devices; however, they harm devices with motors. But then they certainly vary the output of the home appliance.

Reasons For Voltage Fluctuations In Your House

Voltage Fluctuations generally occur because of bad circuitries (to your house or inside your home), overload (be it you utilizing more power than your sanctioned load or your neighbors using more), sudden changing on of high powered devices (like air conditioning unit, motors) or short circuits. Whenever you experience voltage changes, do look for any of these reasons.

What Are Voltage Stabilizers, And How Do They Fix (prevent) Voltage Variations?

As the name suggests, voltage stabilizers support the voltage, which indicates if the supply voltage changes or varies (is less or more than the appropriate range), it brings it to the preferred variety. It does so by using electromagnetic regulators that use tap changers with autotransformers. If the output voltage is not in a variety, a system switches the tap to change the transformer to move the voltage in an acceptable range. It does not provide a consistent voltage output but runs the system in a safe voltage range.

How To Select The Best-Sized Stabilizer?

How To Select The Best-Sized Stabilizer?

The sizing of a stabilizer is highly comparable to the sizing of a UPS or Inverter (power backup). The most crucial thing is to know the load linked to the stabilizer. First, you must take down the power (or watts) for all the home appliances that will be connected to a stabilizer. Overall, the power consumption (or watts) will offer you the load on the stabilizer in watts. However, many stabilizer sizes remain in VA (Volt Ampere) or kVA (kilo Volt Ampere amounts to 1000 Volt Ampere). Although to get to real VA (or Volt Ampere) from Watts (W), you will have to do some measurements; however, to offer a rough approximation, you can increase the Watts worth by 20% to get the approximate VA size that you may require.

e.g., if the amount of watts connected to your stabilizer is 1000, you can take a 1200 VA or 1.2 kVA stabilizer. (Please note that 20% is suitable for residential systems and might not operate in industries if your power factor is bad).

Important Things To Try To Find Before Buying A Voltage Stabilizer?

Before purchasing a voltage stabilizer, the most crucial thing you should note is the input voltage range you get in your home. This is very important because every stabilizer has a minimum and optimum input voltage to stabilize the output voltage. If a voltage stabilizer has input voltage series of 150 V (minutes)– 260 V (max), if the voltage in your home goes listed below 150 V or more than 260 V, then the stabilizer will just cut off the power supply to your home appliance. But if it is 160 V or 250 V (within the working variety), it will try to support it to the preferred output voltage variety.

Rise Defense (or spike guard) is another excellent feature in voltage stabilizers. This function protects your device from unexpected voltage increases such as those that can occur throughout lightning strikes or short circuits. Ensure that you purchase a stabilizer with such function so that your appliances are safe during unexpected rises.

Are There Different Single-Phase And Three-Phase Voltage Stabilizers?

Yes, they are. But a three-phase voltage stabilizer is needed just if voltage stabilization is required for a 3 stage motor or for stabilizing voltage for a full three-phase setup.

All devices utilized at home can work on a single-phase voltage stabilizer, and a three-phase voltage stabilizer might not be needed for property usage unless one is trying to support the voltage of a complete home on a three-phase connection.

It is not advised to put a stabilizer for the whole house since voltage stabilizers also consume electricity, and therefore using it for the entire house will lead to electrical power usage for all 24 hours. Instead, it can be turned off if it is utilized for the private device when the device is turned off.

How Much Electrical Energy Do Voltage Stabilizers Take In?

Electricity consumption of voltage stabilizers depends upon the effectiveness of the stabilizer. Generally, they are 95-98% effective. Which methods take in about 2-5% of the maximum load. So if you have a 1 kVA (or 1000 VA) stabilizer, it would take about 50 Watts (on peak load). This indicates if a 1kVA stabilizer is left on for 10 hours, it will consume about 0.5 system of electrical energy. Thus leaving it on for 24 hr can result in a great deal of electrical energy intake. This is why we recommend using a voltage stabilizer for individual appliances instead of a mainline stabilizer. A mainline stabilizer needs to stay on for 24 hr and 365 days resulting in increased electrical power costs.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *